An air conditioner's filters, coils, and fins require regular maintenance for the unit to function effectively and efficiently throughout its years of service. Neglecting necessary maintenance ensures a steady decline in air conditioning performance while energy use steadily increases. Check out our Energy Saver 101 Infographic: Home Cooling for more ways to help improve your comfort and the efficiency of your air conditioner.
Air Conditioner Filters
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system's efficiency significantly. With normal airflow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil's heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner's energy consumption by 5% to 15%.
For central air conditioners, filters are generally located somewhere along the return duct's length. Common filter locations are in walls, ceilings, furnaces, or in the air conditioner itself. Room air conditioners have a filter mounted in the grill that faces into the room.
Some types of filters are reusable; others must be replaced. They are available in a variety of types and efficiencies. Clean or replace your air conditioning system's filter or filters every month or two during the cooling season. Filters may need more frequent attention if the air conditioner is in constant use, is subjected to dusty conditions, or you have fur-bearing pets in the house.
Air Conditioner Coils
The air conditioner's evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.
Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. You can easily see the condenser coil and notice if dirt is collecting on its fins.
You should minimize dirt and debris near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and debris. Cleaning the area around the coil, removing any debris, and trimming foliage back at least 2 feet (0.6 meters) allow for adequate airflow around the condenser.
The aluminum fins on evaporator and condenser coils are easily bent and can block airflow through the coil. Air conditioning wholesalers sell a tool called a "fin comb" that will comb these fins back into nearly original condition.
شركة تنظيف مكيفات بالدمام
شركة تنظيف خزانات بالدمام
شركة تنظيف سجاد بالدمام
شركة مكافحة حمام بالدمام
شركة مكافحة النمل الابيض بالدمام
شركة النور لمكافحة الحشرات بالدمام
شركة ارمور للخدمات العامة
Pest control is the regulation or management of a species defined as a pest, a member of the animal kingdom that impacts adversely on human activities. The human response depends on the importance of the damage done and will range from tolerance, through deterrence and management, to attempts to completely eradicate the pest. Pest control measures may be performed as part of an integrated pest management strategy.
In agriculture, pests are kept at bay by cultural, chemical and biological means. Ploughing and cultivation of the soil before sowing mitigate the pest burden and there is a modern trend to limit the use of pesticides as far as possible. This can be achieved by monitoring the crop, only applying insecticides when necessary, and by growing varieties and crops which are resistant to pests. Where possible, biological means are used, encouraging the natural enemies of the pests and introducing suitable predators or parasites.
In homes and urban environments, the pests are the rodents, birds, insects and other organisms that share the habitat with humans, and that feed on and spoil possessions. Control of these pests is attempted through exclusion, repulsion, physical removal or chemical means. Alternatively, various methods of biological control can be used including sterilisation programmes.
شركة مكافحة حشرات بالكويت
خدمات اخري للشركة
شركة تعقيم منازل
شركة تنظيف بالكويت
شركة تنظيف مكيفات بالكويت
شركة صيانة مكيفات بالكويت
What Are the Types of Pigeon Repellents?
In this section, we will review each available pigeon repellent in more detail.
Spikes are a common and inexpensive solution for physically excluding pigeons. Most often manufactured in strips, they work on the premise that pigeons cannot land on the pointed ends of the spikes. Spikes come in different shapes and materials - stainless steel or plastic, blunt or pointed, so you can choose based on your requirements.
To use the spikes effectively you must place them in strategic areas where you normally see the pigeons land and perch. With the use of almost invisible clear plastic spikes, you can secure your target areas.
The downside is that birds will relocate, instead of leaving the area. While the spike strategy can represent an effective solution, on a large campus or hotel they won’t be effective enough.
You can use the spikes to keep the birds away from narrow perching areas, however, in areas like apartment buildings, they will simply move to the next best area without spikes. If your goal is to keep them away from a single railing, spikes can be a good solution, but if you are responsible for the entire building with more than 100 railings, you might need to consider another option.
The price may vary depending on the material and length of the product, but the average price for a 10 feet spike is $20. You can check out Bird-X spikes on Amazon.
2. GELS AND PASTES
A gel is exactly what it sounds like, sticky transparent goo. It is normally applied to ledges or other areas with a caulking gun where pigeons are unwanted. Some of the gels include an active ingredient, often essential oils, which the pigeons find offensive.
Pigeons will avoid landing on treated areas since their feet get stuck in the gel and can take them hours to preen off the goo.
These products represent a short-acting solution since the gel quickly dries or gets covered with dust or debris, becomes ineffective, and requires cleanup and reapplication. Unfortunately, smaller birds can also get stuck in the gel, sometimes permanently.
3 packs of BirdX pigeon gel cost about $37, however, it is necessary to carefully consider where to apply the gel.
3. OPTICAL GELS
Optical Gel is a non-toxic, low-profile bird repellent that provides a versatile solution to problems where more traditional bird control methods may not be applicable. It is a multisensory repellent gel that comes in pre-filled dishes.
Optical Gel deters pigeons by triggering multiple sensory responses. According to the manufacturer, the material emits UV light to make it appear as a flame to approaching birds.
Effectiveness: Optical Gel contains citronella and peppermint oil, which are mild and pleasant to humans, but offensive to birds. For the most stubborn birds, Optical Gel is sticky and will make any perch unpleasant should they choose to touch or stand on the product. The gel dishes are small and are easy to install.
Recommended Product: Optical gel is offered by a California company, Bird Barrier. The price per 24(PK) is $95.
4. ULTRASONIC DEVICES
An ultrasonic device represents another harmless solution for pigeon control. Triple Scan technology claims to recognize birds at a distance and make them go away with sound waves. The device itself has a set of modes that you can configure depending on the season.
Pigeons can hear in the same audible range that people do. Therefore, if you are unable to hear the sounds from an ultrasonic device, the birds cannot hear it either.
Ultrasonic systems can be used in a wide variety of locations without causing human interference making them an ideal choice for areas where noise-related scaring is not an option. The exception to this rule may be where women and young children are concerned. With age, the human ear loses the ability to hear ultrasound but, in some women, and particularly in the young, ultrasound falls within hearing ranges and can cause considerable discomfort and headaches. This may have the effect of restricting the use of ultrasonic pigeon and bird hazers when used for pigeon and gull control in urban areas and on industrial sites.
Also, if you are not using electricity the ultrasonic device must be charged frequently.
شركة تركيب طارد حمام بالمدينه المنوره
خدمات أخري للشركة
شركة مكافحة حشرات بالمدينه المنوره
شركة تعقيم بالمدينة المنورة
شركة كشف تسربات المياه بالمدينه المنوره
شركة تنظيف مكيفات بالمدينه المنوره
شركة تركيب طارد حمام بينبع
شركة المسارات الهندسية لفك وتركيب المكيفات بالرياض
Room air conditioners, sometimes called window air conditioners, cool the rooms they are installed in instead of an entire home. When the room air conditioners fail you can either replace it or fix it. If you choose to fix the air conditioner you must disassemble the air conditioning unit from the cabinet cover. Once you remove the air conditioning unit from the cabinet cover you can easily work on any broken parts to replace them. Luckily, removing the air conditioner from the cabinet cover is simple with the right tools and directions
Unplug the air conditioner from the outlet.
Remove the air filter from the air conditioner. In most air conditioners this will involve your popping open the cover and pulling out the air filter.
Remove the entire front plastic panel. Some air conditioner's front panels are just snapped into place, while others have screws holding the panel. Look around the side of the panel and remove any screws that you see holding the panel in place. Once you have removed the screws, try to pull the panel off. If the panel is stuck, use the screwdriver to gently pry the cover off from the corners.
Remove the screws that hold the air conditioner to the cabinet cover. Look around the cabinet cover and remove any screws you notice. Once you have removed all the screws, pull out the air conditioner from the inside. The air conditioner components are heavy, so have an assistant ready to help you pull it out and carry it down. Once you have removed the air conditioner from the cabinet cover, the air conditioner is disassembled and you can fix any broken parts in it.
افصل مكيف الهواء عن مأخذ التيار.
قم بإزالة مرشح الهواء من المكيف. في معظم مكيفات الهواء ، سيتضمن ذلك فتح الغطاء وسحب مرشح الهواء.
قم بإزالة اللوحة البلاستيكية الأمامية بالكامل. يتم تثبيت بعض اللوحات الأمامية لمكيفات الهواء في مكانها ، بينما يحتوي البعض الآخر على براغي تثبتة. انظر حول جانب اللوحة وقم بإزالة أي مسامير تراها تثبت اللوحة في مكانها. بمجرد إزالة البراغي ، حاول سحب اللوحة. إذا كانت اللوحة عالقة ، فاستخدم مفك البراغي لنزع الغطاء برفق من الزوايا.
قم بفك البراغي التي تثبت مكيف الهواء بغطاء الخزانة. انظر حول غطاء الخزانة وقم بإزالة أي مسامير تلاحظها. بمجرد إزالة جميع البراغي ، اسحب مكيف الهواء من الداخل. مكونات مكيف الهواء ثقيلة ، لذا استعن بمساعد جاهز لمساعدتك على سحبها وإخراجها للأسفل. بمجرد إزالة مكيف الهواء من غطاء الخزانة ، يتم تفكيك مكيف الهواء ويمكنك إصلاح أي أجزاء مكسورة فيه.
مكيفات هواء الغرفة ، التي تسمى أحيانًا مكيفات الهواء للشباك ، تبرد الغرف التي تم تركيبهان فيًا بد. عندما تتعطل مكيفات الغرفة يمكنك إما استبدالها أو إصلاحها. إذا اخترت إصلاح مكيف الهواء ، يجب عليك تفكيك وحدة تكييف الهواء من غطاء الخزانة. بمجرد إزالة وحدة تكييف الهواء من غطاء الخزانة ، يمكنك بسهولة العمل على أي أجزاء مكسورة لاستبدالها. لحسن الحظ, إزالة مكيف الهواء من غطاء فإن أمر سهل الخزانة باستخدام الأدوات والإرشادات الصحيحة
شركة تنظيف بالرياض مكيفات
شركة صيانة مكيفات بالرياض
شركة تركيب مكيفات بالرياض
شركة فك مكيفات بالرياض